Saltar al contenido principal

Introducción

Prerequisite-only guide to remove the lower support bracket in an iMac 27" 2017.

Partes

No se especificaron partes.

  1. Use a Phillips screwdriver to remove the nine 3.2 mm screws securing the support bracket. You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.
    • Use a Phillips screwdriver to remove the nine 3.2 mm screws securing the support bracket.

    • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

  2. Remove the lower support bracket (a.k.a. "chin strap") from the iMac enclosure.
    • Remove the lower support bracket (a.k.a. "chin strap") from the iMac enclosure.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Miembro Desde 11/04/15

149,783 Reputación

418 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

138 Miembros

15,634 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 27