Repara tus cosas Comunidad Tienda

iLive IKBC384S FM/AM Antenna Replacement

Introducción

This is a guide to help replace the FM/AM antenna for the iLive IKBC384S.

Qué necesitas

  1. iLive IKBC384S FM/AM Antenna Replacement, Top Cover: paso 1, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement, Top Cover: paso 1, imagen 2 de 2

    • Make sure you remove all seven 3 mm screws before proceeding to the next step.

    Editar

  2. iLive IKBC384S FM/AM Antenna Replacement: paso 2, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: paso 2, imagen 2 de 2

    • Use iOpener or heat gun on all sides except the front.

    Editar

  3. iLive IKBC384S FM/AM Antenna Replacement: paso 3, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: paso 3, imagen 2 de 2

    • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

    • The top of the device will be very difficult to remove because of the adhesive holding it together.

    Editar

  5. iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: paso 4, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: paso 4, imagen 2 de 2

    • Remove all four screws(13.5 mm in length) that are securing the disk drive.

    Editar

  6. iLive IKBC384S FM/AM Antenna Replacement: paso 5, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: paso 5, imagen 2 de 2

    • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

    • Also, disconnect the two power connectors from the motherboard.

    • Once you have removed the ribbon cables and two connectors on the motherboard the disk drive can be removed.

    Editar

  7. iLive IKBC384S FM/AM Antenna Replacement: paso 6, imagen 1 de 1

    • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

    Editar

  8. iLive IKBC384S FM/AM Antenna Replacement: paso 7, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: paso 7, imagen 2 de 2

    • Desolder the antenna at the contact point.

    • Check out this awesome guide for soldering and desoldering tips.

    Editar

  9. iLive IKBC384S FM/AM Antenna Replacement: paso 8, imagen 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: paso 8, imagen 2 de 2

    • Place iOpener on antenna for approximately 5 minutes

    Editar

  10. iLive IKBC384S FM/AM Antenna Replacement: paso 9, imagen 1 de 1

    • Lift up and remove all of the antenna.

    • The antenna will be glued down all the way around the radio

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Tracy Walts

Miembro Desde 03/21/17

201 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

Texas Tech, Team S46-G6, Bennett Spring 2017 Miembro de Texas Tech, Team S46-G6, Bennett Spring 2017

TTU-BENNETT-S17S46G6

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 680