Repara tus cosas Comunidad Tienda

iHome iP1 Back Cover Replacement

Introducción

Use this guide to remove your iHome iP1's back cover. This cover is located on the underside of the platorm connecting the speakers. Although it serves no function other than to protect the motherboard, it is necessary to remove in order to remove many other components of the iHome iP1, such as the speakers and the 30-pin connector.

Qué necesitas

  1. iHome iP1 Back Cover Replacement, Back Cover: paso 1, imagen 1 de 1

    • Orient the iHome upside down with the speakers facing away from you.

    Editar

  3. iHome iP1 Back Cover Replacement: paso 2, imagen 1 de 2 iHome iP1 Back Cover Replacement: paso 2, imagen 2 de 2

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    Editar

  4. iHome iP1 Back Cover Replacement: paso 3, imagen 1 de 1

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Wen Sullivan

Miembro Desde 10/06/16

518 Reputación

4 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 20-1, Livingston Fall 2016 Miembro de Cal Poly, Team 20-1, Livingston Fall 2016

CPSU-LIVINGSTON-F16S20G1

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 214