Saltar al contenido principal

iDea USA CT702 Microphone Replacement

Qué necesitas

  1. iDea USA CT702 Microphone Replacement, Microphone: paso 1, imagen 1 de 1
    • Place the tablet face up with portholes facing you.

  2. iDea USA CT702 Microphone Replacement: paso 2, imagen 1 de 2 iDea USA CT702 Microphone Replacement: paso 2, imagen 2 de 2
    • Use a fingernail, or a plastic opening tool to gently pry the black panel around the portholes.

    • Be gentle and take your time. Excessive force could damage the device.

  3. iDea USA CT702 Microphone Replacement: paso 3, imagen 1 de 3 iDea USA CT702 Microphone Replacement: paso 3, imagen 2 de 3 iDea USA CT702 Microphone Replacement: paso 3, imagen 3 de 3
    • Use your fingers to pry the rest of the back off; slowly apply pressure from each side to break each clip connection.

  4. iDea USA CT702 Microphone Replacement: paso 4, imagen 1 de 1
    • Once the back is off, position the tablet as shown and be sure to warm your soldering iron.

  5. iDea USA CT702 Microphone Replacement: paso 5, imagen 1 de 1
    • Place tip of the soldering iron on the end of the wire to break connection.

    • Remember to use proper safety precautions when soldering.

  6. iDea USA CT702 Microphone Replacement: paso 6, imagen 1 de 1
    • Grip the new microphone with tweezers and place in the slot.

    • Solder the new connections while using tweezers to hold the speaker steady.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Benton Gray

Miembro Desde 03/11/15

201 Reputación

2 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 115