Saltar al contenido principal

iDea USA CT702 Button Replacement

Qué necesitas

  1. iDea USA CT702 Button Replacement, Button: paso 1, imagen 1 de 3 iDea USA CT702 Button Replacement, Button: paso 1, imagen 2 de 3 iDea USA CT702 Button Replacement, Button: paso 1, imagen 3 de 3
    • Place the device face up.

    • Use a plastic opening tool to gently pry open the black panel around the portholes.

  2. iDea USA CT702 Button Replacement: paso 2, imagen 1 de 3 iDea USA CT702 Button Replacement: paso 2, imagen 2 de 3 iDea USA CT702 Button Replacement: paso 2, imagen 3 de 3
    • Pry the rest of the back off; slowly apply pressure from each side to break each clip connection.

  3. iDea USA CT702 Button Replacement: paso 3, imagen 1 de 2 iDea USA CT702 Button Replacement: paso 3, imagen 2 de 2
    • With a plastic spudger tool, pry the keys away from the black key mat to remove them.

    • It is easiest to start with the volume up button key and then work on freeing the next two.

  4. iDea USA CT702 Button Replacement: paso 4, imagen 1 de 2 iDea USA CT702 Button Replacement: paso 4, imagen 2 de 2
    • Replace the button keys, starting with the outer and ending with the innermost key.

    • The back of each button key has a notch that matches an indent on the black button mat. Match the notches and the indents to properly align the buttons.

    • To replace the back cover, follow the first three steps in reverse order.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Daniel Brandt

Miembro Desde 03/11/15

201 Reputación

2 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 139