Saltar al contenido principal

iBook G3 Clamshell CD Faceplate Replacement

Qué necesitas

  1. iBook G3 Clamshell CD Faceplate Replacement, Battery: paso 1, imagen 1 de 1
    • Use a coin to turn both battery locking screws 90 degrees to the left.

    • Remove the battery cover.

    • Remove the battery from the computer by pulling up on the plastic tab.

  2. iBook G3 Clamshell CD Faceplate Replacement, CD Faceplate: paso 2, imagen 1 de 1
    • Use a straightened paperclip to manually eject the CD-ROM tray.

  3. iBook G3 Clamshell CD Faceplate Replacement: paso 3, imagen 1 de 1
    • Remove the single black Phillips screw from the center of the CD-ROM bezel.

  4. iBook G3 Clamshell CD Faceplate Replacement: paso 4, imagen 1 de 1
    • Grasp the CD-ROM bezel and rotate it upward to remove it from the drive.

    If you rotate the bezel upward as described- you SNAP OFF THE TAB THAT YOU REMOVED THE SCREW FROM, which is what ATTACHES the bezel to the drive!!!. THANKS!

    quayd - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

2 comentarios

There are two small black phillips screws which ALSO need to be removed ...... on some models. Although appearing identical, these covers are "similar" but NOT interchangeable between models of CD-Rom.

John Foster - Contestar

Help I've broke my drive cover and it won't go back on how do I fix that

Mr. Yee Macinuwm - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 10,048