Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

iBook G3 14" Rear Display Bezel Replacement

Qué necesitas

  1. iBook G3 14" Rear Display Bezel Replacement, Battery: paso 1, imagen 1 de 1
    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

  2. iBook G3 14" Rear Display Bezel Replacement, Rear Display Bezel: paso 2, imagen 1 de 2 iBook G3 14" Rear Display Bezel Replacement, Rear Display Bezel: paso 2, imagen 2 de 2
    • Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

    • If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

  3. iBook G3 14" Rear Display Bezel Replacement: paso 3, imagen 1 de 2 iBook G3 14" Rear Display Bezel Replacement: paso 3, imagen 2 de 2
    • Insert the flat end of a spudger perpendicular to the face of the display into the gap between the front and rear bezels near the upper left corner of the display.

    • Rotate the spudger away from the display to pry the rear bezel off the front bezel.

  4. iBook G3 14" Rear Display Bezel Replacement: paso 4, imagen 1 de 1
    • Run your spudger along the top edge of the front display bezel to evenly separate the two bezels.

  5. iBook G3 14" Rear Display Bezel Replacement: paso 5, imagen 1 de 2 iBook G3 14" Rear Display Bezel Replacement: paso 5, imagen 2 de 2
    • Working down from the upper left corner, use the flat end of a spudger to pry the rear bezel away from the left edge of the display.

  6. iBook G3 14" Rear Display Bezel Replacement: paso 6, imagen 1 de 1
    • Use the flat end of a spudger to pry the rear bezel away from the right edge of the display.

    • If necessary, pry along the bottom edge of the rear bezel to separate it from the display assembly.

  7. iBook G3 14" Rear Display Bezel Replacement: paso 7, imagen 1 de 1
    • Lift the rear bezel off the display assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,054