Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

iBook G3 14" Airport Card Replacement

Introducción

Install an original Airport 802.11b card internally.

Qué necesitas

  1. iBook G3 14" Airport Card Replacement, Battery: paso 1, imagen 1 de 1

    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

    Traducir

  2. iBook G3 14" Airport Card Replacement, Airport Card: paso 2, imagen 1 de 1

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

    Traducir

  4. iBook G3 14" Airport Card Replacement: paso 3, imagen 1 de 1

    • If your computer does not have an Airport card installed, skip to the RAM shield removal step.

    • Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.

    Traducir

  5. iBook G3 14" Airport Card Replacement: paso 4, imagen 1 de 1

    • Grasp the clear plastic tab on the Airport card and pull toward the right.

    Traducir

  6. iBook G3 14" Airport Card Replacement: paso 5, imagen 1 de 1

    • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Documentos Adjuntos

Autor

con 2 otros colaboradores

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

Insignias: 36

+ 33 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 8,004