Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the iFixit opening tool, pry open and remove the back cover of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH000 screwdriver to unscrew the four 3.5mm Philips head screws located on the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the port connecting the battery and the motherboard and then remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to lift the latch that holds the hard drive cable in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to pry the hard drive out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the plastic wedges up on both sides of the hard drive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH0 screwdriver to unscrew the three 3 mm Phillips head screws located on the fan.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH1 screwdriver to unscrew the four 3mm Phillips head screws located on the processor cover.
-
Disconnect the cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the plastic arm attached to the processor and remove.
-
Disconnect the cable attaching the fan to the motherboard and remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH1 screwdriver to unscrew one 3mm Phillips head screws on Wifi card.
-
Disconnect the Wifi card.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH1 screwdriver to unscrew six 3 mm Phillips head screws on the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the iFixit opening tools to pry motherboard from back of laptop.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.