Saltar al contenido principal
Ayuda

iMac G5 17" Model A1144 Hard Drive Replacement

Guía Destacada

Guía Destacada

Esta guía ha sido valorada como excepcionalmente genial por el personal de iFixit.

  • Autor: Walter Galan
  • Tiempo estimado: 45 minutos
  • Dificultad: Moderar

Upgrade your hard drive for an instant increase in storage space!

Paso 1 Hard Drive  ¶ 

Remove the two T8 Torx screws securing the upper bracket to the hard drive.

Paso 1 Hard Drive  ¶ 

  • Remove the two T8 Torx screws securing the upper bracket to the hard drive.

  • Transfer the bracket and screws to your new hard drive.

Paso 2  ¶ 

Remove the two T8 Torx pins on the connector side of the hard drive and transfer them to your new hard drive.

Paso 2  ¶ 

  • Remove the two T8 Torx pins on the connector side of the hard drive and transfer them to your new hard drive.

Paso 3  ¶ 

Use the flat end of a spudger to pry the hard drive thermal sensor off the hard drive.

Paso 3  ¶ 

  • Use the flat end of a spudger to pry the hard drive thermal sensor off the hard drive.

  • Don't forget to transfer this to your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.