Saltar al contenido principal
Ayuda

MacBook Air Models A1237 and A1304 DC-In Board Replacement

Your Air is thirsty! Keep those electrons flowing and fix your broken DC-In board.

Secciones
Herramientas

Paso 1 DC-In Board  ¶ 

Remove the single Phillips screw securing the display data cable ground loop to the upper case.

Paso 1 DC-In Board  ¶ 

  • Remove the single Phillips screw securing the display data cable ground loop to the upper case.

Paso 2  ¶ 

Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case. Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Paso 2  ¶ 

  • Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.

  • Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.