Saltar al contenido principal
Ayuda

MacBook Pro 15" Unibody Late 2008 and Early 2009 Lower Case Replacement

Replace the aluminum bottom case in a MacBook Pro Unibody.

Replace the aluminum bottom case in a MacBook Pro Unibody.

Paso 1 Lower Case  ¶ 

Remove the following eight screws securing the lower case to the chassis:

Paso 1 Lower Case  ¶ 

  • Remove the following eight screws securing the lower case to the chassis:

  • One 5.4 mm Phillips screw.

  • Three 14 mm Phillips screws.

  • Four 3.5 mm Phillips screws.

Paso 2  ¶ 

Using both hands, lift and remove the lower case off the upper case.

Paso 2  ¶ 

  • Using both hands, lift and remove the lower case off the upper case.