Saltar al contenido principal
Ayuda

iBook G4 14" 1.42 GHz AirPort Extreme Card Replacement

Install an AirPort Extreme 802.11g card internally.

Paso 1 AirPort Extreme Card  ¶ 

Remove the following three screws from the AirPort card bracket:

Paso 1 AirPort Extreme Card  ¶ 

  • Remove the following three screws from the AirPort card bracket:

  • Three 3 mm Phillips screws.

  • Lift the metal AirPort card retaining bracket up and out of the computer.

Paso 2  ¶ 

Remove the two 3 mm Phillips screws securing the AirPort card to the logic board.

Paso 2  ¶ 

  • Remove the two 3 mm Phillips screws securing the AirPort card to the logic board.

Paso 3  ¶ 

Using a spudger, pry up on the AirPort card from the end nearest to the hard drive to separate the connector from the logic board.

Paso 3  ¶ 

  • Using a spudger, pry up on the AirPort card from the end nearest to the hard drive to separate the connector from the logic board.

  • Be sure to pry only between the metal framework and the AirPort card.

Paso 4  ¶ 

Hold the AirPort card in one hand and use a spudger to disconnect the two antenna cables.

Paso 4  ¶ 

  • Hold the AirPort card in one hand and use a spudger to disconnect the two antenna cables.

  • AirPort card remains.