Saltar al contenido principal
Ayuda

Técnica: HP Deskjet 6122 Software & Driver Update

Necesita Mejores Imágenes

Necesita Mejores Imágenes

Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!

This guide will provide a step by step guide describing how to update software and drivers onto the printer.

  • Autor: Joe
  • Dificultad: Fácil

A printer’s drivers must be updated to allow it to perform as it was intended to. Updating the drivers and software helps to prevent problems such as a loss of communication with the computer or the inability to compete jobs that are sent to it.

Paso 1 HP Deskjet 6122 Software & Driver Update  ¶ 

First, you must make sure that the computer has internet access.

Paso 1 HP Deskjet 6122 Software & Driver Update  ¶ 

  • First, you must make sure that the computer has internet access.

  • Then, check if the printer is plugged in and connected to a computer.

  • To check to see if the computer is connected to the printer open up the Control Panel and click on “view devices and printers”. If the printer is not listed, click add a printer and follow the prompts.

Paso 2  ¶ 

Click here to be redirected to the website, to download the driver update. Select the computer’s operating system, then click next.

Paso 2  ¶ 

  • Click here to be redirected to the website, to download the driver update. Select the computer’s operating system, then click next.

Paso 3  ¶ 

The browser will redirect to a page labeled “Step two: Select a download”. Click on “Driver – Product Installation Software”.  This will provide a list of the most up-to-date drivers and software installations for the printer.

Paso 3  ¶ 

  • The browser will redirect to a page labeled “Step two: Select a download”. Click on “Driver – Product Installation Software”. This will provide a list of the most up-to-date drivers and software installations for the printer.

  • Note: Other drivers and software are available for different operating systems.

Paso 4  ¶ 

No hay imagen

Paso 4  ¶ 

  • Follow the instructions provided by the website, then wait for the site to confirm that the download was successful.

Paso 5  ¶ 

Restart the computer and printer to allow the new software to finish its installation and run properly.

Paso 5  ¶ 

  • Restart the computer and printer to allow the new software to finish its installation and run properly.