Saltar al contenido principal
Ayuda

iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement

Remove bottom housing

  • Autor: Justin
  • Dificultad: Muy fácil

Remove bottom housing to reveal the inside of the iMac.

Secciones
Herramientas

Paso 1 Bottom Plate Housing  ¶ 

Remove the four 25mm T-15 screws. Remove the four 25mm T-15 screws.

Paso 1 Bottom Plate Housing  ¶ 

  • Remove the four 25mm T-15 screws.

Paso 2  ¶ 

Open the housing plate. Be gentle with the wires still connected to the logic board  so as not to ruin the cables.

Paso 2  ¶ 

  • Open the housing plate.

  • Be gentle with the wires still connected to the logic board so as not to ruin the cables.

  • A fixed plug connector between the logic board and upper unit will cause some resistance. Pull gently but firmly.