Saltar al contenido principal
Ayuda

MacBook Air 11" Mid 2011 Left Speaker Replacement

Replace a blown-out left speaker in your MacBook Air 11" Mid 2011.

Rock too hard? Use this guide to replace a blown-out left speaker.

Paso 1 Left Speaker  ¶ 

Use the flat end of a spudger to pry the I/O board cable connector up off its socket on the I/O board.

Paso 1 Left Speaker  ¶ 

  • Use the flat end of a spudger to pry the I/O board cable connector up off its socket on the I/O board.

  • Bend the cable away from the I/O board.

Paso 2  ¶ 

Use the tip of a spudger to de-route the left speaker cable from the notch cut into the edge of the I/O board.

Paso 2  ¶ 

  • Use the tip of a spudger to de-route the left speaker cable from the notch cut into the edge of the I/O board.

Paso 3  ¶ 

Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the I/O board.

Paso 3  ¶ 

  • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the I/O board.

  • Make sure to pry upward from beneath the wires.

Paso 4  ¶ 

Use the flat end of a spudger to pry the left speaker off the adhesive securing it to the upper case. Only pry up on the speaker from the areas of bare aluminum on the upper case. Prying up from the keyboard area may damage the keyboard and the speaker itself.

Paso 4  ¶ 

  • Use the flat end of a spudger to pry the left speaker off the adhesive securing it to the upper case.

  • Only pry up on the speaker from the areas of bare aluminum on the upper case. Prying up from the keyboard area may damage the keyboard and the speaker itself.

Paso 5  ¶ 

Remove the left speaker from the upper case.

Paso 5  ¶ 

  • Remove the left speaker from the upper case.