Saltar al contenido principal
Ayuda

Dell Inspiron 9100 Fan 3 Replacement

Bordeador de Pasos

Bordeador de Pasos

Esta guía tiene pasos innecesarios. Recórtalos para que sean más conciso!

Removal of fan #3.

This guide requires a Phillips #00 screwdriver

Secciones
Herramientas

Paso 1 Fan 3  ¶ 

Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel. These screws will remain in the panel Lift up on the side of the fan nearest the screws to release the fan module

Paso 1 Fan 3  ¶ 

  • Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.

  • These screws will remain in the panel

  • Lift up on the side of the fan nearest the screws to release the fan module