Saltar al contenido principal
Ayuda

Técnica: How to check Sony Ericsson W200i battery voltage

Guide to remove and check for battery problems in the Sony Ericsson W200i.

  • Autor: Ryan Waltman
  • Tiempo estimado: 5 - 10 minutos
  • Dificultad: Moderar

Checking the battery is fairly easy, all you will need is a multimeter, which can be purchased at a local hardware store.

Paso 1 How to check Sony Ericsson W200i battery voltage  ¶ 

Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV. Turn the multimeter on.

Paso 1 How to check Sony Ericsson W200i battery voltage  ¶ 

  • Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV.

  • Turn the multimeter on.

Paso 2  ¶ 

Touch the red probe to the indicated positive side and the black probe to the indicated negative side.

Paso 2  ¶ 

  • Touch the red probe to the indicated positive side and the black probe to the indicated negative side.

  • Replace the battery if the voltage reads below 2.5 volts.