Saltar al contenido principal
Ayuda

iPod Nano 1st Generation Click Wheel Replacement

  • Autor: iRobot
  • Dificultad: Difícil

The click wheel receives the feedback of your fingers and transmits it to the logic board.

Paso 1 Click Wheel  ¶ 

Use a spudger to pry up the orange click wheel ribbon from the front panel.

Paso 1 Click Wheel  ¶ 

  • Use a spudger to pry up the orange click wheel ribbon from the front panel.

  • Be careful not to bend the click wheel ribbon too much, or it might damage the electronics on the cable.

Paso 2  ¶ 

Lift the click wheel out of the front panel.

Paso 2  ¶ 

  • Lift the click wheel out of the front panel.