Saltar al contenido principal
Ayuda

Samsung Galaxy Tab 3 8.0 Display Assembly - Touch screen & LCD Display Replacement

Guía Contribuida Por Miembros

Guía Contribuida Por Miembros

Un miembro increíble de nuestra comunidad escribió esta guía. No está supervisada por el personal de iFixit.

Samsung Galaxy Tab 3 8.0 Display Assembly - Touch screen & LCD Display Replacement

  • Autor: ZFix
  • Tiempo estimado: 30 - 40 minutos
  • Dificultad: Moderar

If your tablet has a broken touch screen glass (digitizer), LCD display or you want to chang the micro USB charging port, loudspeakers, audio jack connector, etc., with this guide we will help you to do it.


Partes Pertinentes

Paso 1 Display Assembly - Touch screen & LCD Display  ¶ 

Put the scotch tape in order not to scatter pieces of glass. Remove any memory card and SIM card (if the tablet is 3G version). Remove any memory card and SIM card (if the tablet is 3G version).

Paso 1 Display Assembly - Touch screen & LCD Display  ¶ 

  • Put the scotch tape in order not to scatter pieces of glass.

  • Remove any memory card and SIM card (if the tablet is 3G version).

Paso 2 Battery / Back Cover  ¶ 

Using plastic tools remove the back / battery cover. Be careful with the Power and Volume buttons. Be careful with the Power and Volume buttons.

Paso 2 Battery / Back Cover  ¶ 

  • Using plastic tools remove the back / battery cover.

  • Be careful with the Power and Volume buttons.

Paso 3  ¶ 

Before doing anything, disconnect the battery.

Paso 3  ¶ 

  • Before doing anything, disconnect the battery.

Paso 4 Micro USB Charging Port / Dock with Flex Cable  ¶ 

This step is only if you want to replace the micro USB port flex cable. Remove the two screws and disconnect the charging port flex cable from the main board. Use a plastic tool to unstick the flex cable from the middle frame.

Paso 4 Micro USB Charging Port / Dock with Flex Cable  ¶ 

  • This step is only if you want to replace the micro USB port flex cable.

  • Remove the two screws and disconnect the charging port flex cable from the main board.

  • Use a plastic tool to unstick the flex cable from the middle frame.

Paso 5 Battery  ¶ 

This step is for only if you want to change the battery. The battery is stuck to the middle panel. Use the white sticker to remove it.

Paso 5 Battery  ¶ 

  • This step is for only if you want to change the battery.

  • The battery is stuck to the middle panel.

  • Use the white sticker to remove it.

Paso 6 Components 1  ¶ 

2x loudspeackers Power & Volume buttons flex cable Audio jack flex cable

Paso 6 Components 1  ¶ 

  • 2x loudspeackers

  • Power & Volume buttons flex cable

  • Audio jack flex cable

Paso 7 Components 2  ¶ 

Front camera Wi-Fi antenna

Paso 7 Components 2  ¶ 

  • Front camera

  • Wi-Fi antenna

Paso 8  ¶ 

Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier. Use a gloves to avoid any injurys from glass. Do not rush.

Paso 8  ¶ 

  • Use a heat gun or hair dryer and warm the touch screen glass. This will make the adhesive more flexible and the separation easier.

  • Use a gloves to avoid any injurys from glass.

  • Do not rush.

Paso 9  ¶ 

Beware for the menu buttons flex cable. Beware for the menu buttons flex cable. Beware for the menu buttons flex cable.

Paso 9  ¶ 

  • Beware for the menu buttons flex cable.

Paso 10  ¶ 

Always test the new spare part before final installation. Always test the new spare part before final installation.

Paso 10  ¶ 

  • Always test the new spare part before final installation.

Paso 11  ¶ 

Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat. If the adhesive tape is not in good condition you must install a new one. If the adhesive tape is not in good condition you must install a new one.

Paso 11  ¶ 

  • Transfer the black tape from the old display. It keeps the distance the display from the battery and protects it from overheat.

  • If the adhesive tape is not in good condition you must install a new one.

Paso 12  ¶ 

Start with reassembling. .

Paso 12  ¶ 

  • Start with reassembling.

  • .

  • .

  • .

  • .

  • .

  • .

  • Did you do it successfully.