Saltar al contenido principal
Ayuda

Nikon D7000 Mirror Box & Viewfinder Replacement

Rebanar y Trocear

Rebanar y Trocear

Los pasos de esta guía deben ser divididos y convertidos en una serie de guías de prerrequisitos.

This guide will help you replace the mirror box and viewfinder in the Nikon D7000.

  • Autor: Thomas Willson
  • Tiempo estimado: 1 - 2 horas
  • Dificultad: Difícil

Use this guide to replace the mirror box and viewfinder.

Paso 1 Mirror Box & Viewfinder  ¶ 

Pull out ribbon cable from circuit asembly near front left of device.

Paso 1 Mirror Box & Viewfinder  ¶ 

  • Pull out ribbon cable from circuit asembly near front left of device.

Paso 2  ¶ 

Desolder red & black power leads.

Paso 2  ¶ 

  • Desolder red & black power leads.

  • Check out our soldering guide for help!

Paso 3  ¶ 

Disconnect ribbon cable at the top right of camera.

Paso 3  ¶ 

  • Disconnect ribbon cable at the top right of camera.

Paso 4  ¶ 

Disconnect ribbon cable at top right of camera.

Paso 4  ¶ 

  • Disconnect ribbon cable at top right of camera.

Paso 5  ¶ 

Disconnected ribbon cable at rear right of viewfinder.

Paso 5  ¶ 

  • Disconnected ribbon cable at rear right of viewfinder.

Paso 6  ¶ 

Remove the two 5.5mm J000 screws

Paso 6  ¶ 

  • Remove the two 5.5mm J000 screws

Paso 7  ¶ 

Remove the 5.5 mm J000 screw.

Paso 7  ¶ 

  • Remove the 5.5 mm J000 screw.

Paso 8  ¶ 

Remove the viewfinder from the mirror box assembly.

Paso 8  ¶ 

  • Remove the viewfinder from the mirror box assembly.