Saltar al contenido principal
Ayuda

iPod 4th Generation or Photo Hard Drive Cable Replacement

  • Autor: iRobot
  • Dificultad: Moderar

Connects the hard drive to the logic board.

Secciones
Herramientas
Partes Pertinentes

Paso 1 Hard Drive Cable  ¶ 

Peel up the black adhesive strip covering the hard drive ribbon cable.

Paso 1 Hard Drive Cable  ¶ 

  • Peel up the black adhesive strip covering the hard drive ribbon cable.

Paso 2  ¶ 

Use the tip of your finger or a spudger to carefully flip up the black connector securing the hard drive cable to the logic board.  Note that the black retaining clip flips 90 degrees toward vertical, in the direction of the cable.

Paso 2  ¶ 

  • Use the tip of your finger or a spudger to carefully flip up the black connector securing the hard drive cable to the logic board. Note that the black retaining clip flips 90 degrees toward vertical, in the direction of the cable.

Paso 3  ¶ 

Pull the orange hard drive cable directly out of its connector.

Paso 3  ¶ 

  • Pull the orange hard drive cable directly out of its connector.