Saltar al contenido principal
Ayuda

iPod 3rd Generation Hard Drive Replacement

Guía Destacada

Guía Destacada

Esta guía ha sido valorada como excepcionalmente genial por el personal de iFixit.

  • Autor: iRobot
  • Tiempo estimado: 35 - 50 minutos
  • Dificultad: Moderar

Upgrade your storage with a new hard drive.

Secciones
Herramientas

Paso 1 Hard Drive  ¶ 

Lift up the hard drive with one hand and carefully disconnect the hard drive ribbon from the logic board.

Paso 1 Hard Drive  ¶ 

  • Lift up the hard drive with one hand and carefully disconnect the hard drive ribbon from the logic board.

  • Lift the hard drive out of the iPod.

Paso 2  ¶ 

Peel back the metallic tape connecting the hard drive ribbon to the blue mounting bracket.

Paso 2  ¶ 

  • Peel back the metallic tape connecting the hard drive ribbon to the blue mounting bracket.

Paso 3  ¶ 

Use a spudger to carefully disconnect the orange ribbon cable from the hard drive.

Paso 3  ¶ 

  • Use a spudger to carefully disconnect the orange ribbon cable from the hard drive.

  • If the cable doesn't come free easily, it may be helpful to gently wiggle the cable from side to side.

Paso 4  ¶ 

Lift the hard drive mounting bracket and cable off the hard drive.

Paso 4  ¶ 

  • Lift the hard drive mounting bracket and cable off the hard drive.

Paso 5  ¶ 

Lift the blue and white mounting bracket off the other side of the hard drive.

Paso 5  ¶ 

  • Lift the blue and white mounting bracket off the other side of the hard drive.

Paso 6  ¶ 

Hard drive remains.

Paso 6  ¶ 

  • Hard drive remains.