Saltar al contenido principal
Ayuda

Replacing Creative Zen X-Fi Button Input Chip

Necesita Mejores Imágenes

Necesita Mejores Imágenes

Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!

Separate the button input chip from the midsection plate and then unsolder it from the motherboard.

This chip allows the user to input information to the device and to navigate the MP3 player's menus.

Paso 1 Unsolder the Button Input Chip  ¶ 

Locate the soldering joints connecting the button input pad to the motherboard.

Paso 1 Unsolder the Button Input Chip  ¶ 

  • Locate the soldering joints connecting the button input pad to the motherboard.

  • Hold the wires in place for easier access to the soldering joints.

  • When using a soldering iron, keep your hands and fingers as far as possible from the iron's tip to avoid burning your skin.

  • Using a soldering iron, melt the solder connecting the red wire to the motherboard. Do the same action to the black wire.