Saltar al contenido principal
Ayuda

PowerBook G3 Pismo PC Card Cage Replacement

  • Autor: iRobot
  • Dificultad: Difícil

How to remove the PCMCIA card cage holder.

Paso 1 PC Card Cage  ¶ 

Turn the logic board over so that the ports are facing you.

Paso 1 PC Card Cage  ¶ 

  • Turn the logic board over so that the ports are facing you.

  • Remove the four Phillips screws holding the PC card cage to the logic board.

  • Two of the screws are short and two are longer. The two short screws go on the side closer to the PC card eject button.

Paso 2  ¶ 

Turn the logic board back over.

Paso 2  ¶ 

  • Turn the logic board back over.

  • Clasp the PC card cage between your thumb and index finger and lift it directly upward.