Saltar al contenido principal
Ayuda

PowerBook G4 Aluminum 15" 1.5-1.67 GHz Speakers Replacement

  • Autor: iRobot
  • Dificultad: Difícil

Restore sound to your laptop by replacing the speakers.

Paso 1 Speakers  ¶ 

Remove the two 3 mm black Phillips screws from the left ambient light sensor board.

Paso 1 Speakers  ¶ 

  • Remove the two 3 mm black Phillips screws from the left ambient light sensor board.

  • Lift the left ambient light sensor board out of the computer, removing tape as necessary.

Paso 2  ¶ 

Deroute the Bluetooth and RJ-11 cables from around the left side of the speaker.

Paso 2  ¶ 

  • Deroute the Bluetooth and RJ-11 cables from around the left side of the speaker.

Paso 3  ¶ 

Disconnect the speaker cable from the DC/Sound card.

Paso 3  ¶ 

  • Disconnect the speaker cable from the DC/Sound card.

Paso 4  ¶ 

Remove the 4 mm hex nut from below the left speaker.

Paso 4  ¶ 

  • Remove the 4 mm hex nut from below the left speaker.

  • Remove the 3 mm black Phillips screw from bottom left corner of the speaker assembly, to the left of the battery compartment.

Paso 5  ¶ 

Lift the speaker assembly (including the right speaker) out of the computer.

Paso 5  ¶ 

  • Lift the speaker assembly (including the right speaker) out of the computer.