Saltar al contenido principal
Ayuda

Kodak EasyShare LS743 Capacitor Replacement

Policía de Gramática

Policía de Gramática

Acepta a tu profesor de inglés interior y ayuda a mejorar la gramática de esta guía!

Texto Confuso

Texto Confuso

Parte del texto de esta guía es confuso, duplicado o fuera de tema. Mejorala!

Percance de Marcado

Percance de Marcado

Esta guía necesita mejores marcas. Ayuda corrigiendo o haciendo algunas anotaciones de marcado.

Replace the capacitor in your Kodak EasyShare LS743.

  • Autor: Elizabeth Loui
  • Tiempo estimado: 25 - 30 minutos
  • Dificultad: Difícil

This will teach you how to remove the capacitor in your Kodak EasyShare LS743.

Paso 1 Capacitor  ¶ 

The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it. Connect the two capacitor wires briefly with a pair of metal tweezers to discharge it.  You may see a small spark. Remove 8 screws.

Paso 1 Capacitor  ¶ 

  • The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.

  • Connect the two capacitor wires briefly with a pair of metal tweezers to discharge it. You may see a small spark.

  • Remove 8 screws.

  • 2 screws in the front (2X 4.31mm).

  • 2 screws on the bottom (2X3.30MM).

  • 4 screws in the back (3x 3.33mm, and 1x 4.34mm).

Paso 2  ¶ 

Remove and set aside the tripod mount.

Paso 2  ¶ 

  • Remove and set aside the tripod mount.

Paso 3  ¶ 

Pull the black latch outward slightly to release the flex cable.

Paso 3  ¶ 

  • Pull the black latch outward slightly to release the flex cable.

  • Carefully disconnect the orange flex cable.

Paso 4  ¶ 

Desolder both wires and remove them.

Paso 4  ¶ 

  • Desolder both wires and remove them.

Paso 5  ¶ 

Remove the capacitor (attached by adhesive) and desolder. Remove the capacitor (attached by adhesive) and desolder.

Paso 5  ¶ 

  • Remove the capacitor (attached by adhesive) and desolder.