Saltar al contenido principal
Ayuda

Xbox 360 Wireless Controller Buttons Replacement

Button installation.

  • Autor: Brett Hartt
  • Tiempo estimado: 15 minutos
  • Dificultad: Moderar

Repair or replace faulty buttons on your Xbox 360 wireless controller.

Paso 1 Buttons  ¶ 

Remove the rubber pad from the back of the input buttons.

Paso 1 Buttons  ¶ 

  • Remove the rubber pad from the back of the input buttons.

Paso 2  ¶ 

Using a pair of tweezers, remove the buttons from the front case. A Button

Paso 2  ¶ 

  • Using a pair of tweezers, remove the buttons from the front case.

  • A Button

  • B Button

  • X Button

  • Y Button

  • Start Button

  • Select Button

  • Guide Button

Paso 3  ¶ 

Using a pair of tweezers, lift the home button's LED ring out of the front case of the controller.

Paso 3  ¶ 

  • Using a pair of tweezers, lift the home button's LED ring out of the front case of the controller.

  • All of the buttons have tabs that correspond to slots in the front case. This prevents buttons from being placed in the incorrect position or orientation.