Saltar al contenido principal
Ayuda

PlayStation 3 Slim Top Cover Replacement

Remove the top cover to access your PlayStation 3 Slim's internals.

  • Autor: Andrew Bookholt
  • Tiempo estimado: 5 - 15 minutos
  • Dificultad: Moderar

Use this guide to remove the plastic top cover.

Paso 1 Top Cover  ¶ 

Turn the PS3 over and lay it on its backside.

Paso 1 Top Cover  ¶ 

  • Turn the PS3 over and lay it on its backside.

  • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

  • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

Paso 2  ¶ 

Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case. Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

Paso 2  ¶ 

  • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

Paso 3  ¶ 

Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

Paso 3  ¶ 

  • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

Paso 4  ¶ 

Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

Paso 4  ¶ 

  • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

Paso 5  ¶ 

Lift the top cover from its rear edge and rotate it toward the front of the PS3. Lift the top cover off the PS3.

Paso 5  ¶ 

  • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

  • Lift the top cover off the PS3.