Saltar al contenido principal
Ayuda

MacBook Pro 17" Models A1151 A1212 A1229 and A1261 Optical Drive Replacement

Replace the optical drive in your MacBook Pro 17" Models A1151 A1212 A1229 and A1261.

  • Autor: iRobot
  • Dificultad: Moderar

Upgrade or replace the SuperDrive.

Paso 1 Optical Drive  ¶ 

Remove the single Phillips screw securing the mounting bracket to the left side of the optical drive.

Paso 1 Optical Drive  ¶ 

  • Remove the single Phillips screw securing the mounting bracket to the left side of the optical drive.

Paso 2  ¶ 

Rotate the drive and disconnect the orange ribbon cable from the optical drive.

Paso 2  ¶ 

  • Rotate the drive and disconnect the orange ribbon cable from the optical drive.

Paso 3  ¶ 

Remove the two Phillips screws securing the mounting bracket to the rear of the optical drive.

Paso 3  ¶ 

  • Remove the two Phillips screws securing the mounting bracket to the rear of the optical drive.

Paso 4  ¶ 

Rotate the drive and remove the single Phillips screw securing the mounting bracket to the right side of the optical drive.

Paso 4  ¶ 

  • Rotate the drive and remove the single Phillips screw securing the mounting bracket to the right side of the optical drive.

  • If you purchased an optical drive without mounting brackets, simply transfer the three silver metal brackets and orange ribbon cable to your new optical drive.

  • If you have a CD or any other object jammed in your optical drive, we have an optical drive repair guide.