Saltar al contenido principal
Ayuda

Texas Instruments TI-92 Screen Cover Replacement

Imágenes Inconsistentes

Imágenes Inconsistentes

Actualizando las imágenes de esta guía para que sean más consistente con los requisitos previos aumentaran su genialidad.

In this guide we will show how to access and remove the plastic covering and protecting the LCD display.

Paso 1 Screen Cover  ¶ 

Lift one of the ends of the sticky black strips located around the screen.

Paso 1 Screen Cover  ¶ 

  • Lift one of the ends of the sticky black strips located around the screen.

  • This process will be facilitated by the use of the Ipod Opening Tools or a similar tool.

Paso 2  ¶ 

Start to remove the strips by pulling them outward carefully. Lift one end of the strip and peel it down to the other end. If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges. If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges.

Paso 2  ¶ 

  • Start to remove the strips by pulling them outward carefully. Lift one end of the strip and peel it down to the other end.

  • If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges.

Paso 3  ¶ 

If one of the remaining strips is sticking to the others and can not be easily removed, use a tool such as the Ipod Opening Tool to start pulling the strip up. If one of the remaining strips is sticking to the others and can not be easily removed, use a tool such as the Ipod Opening Tool to start pulling the strip up.

Paso 3  ¶ 

  • If one of the remaining strips is sticking to the others and can not be easily removed, use a tool such as the Ipod Opening Tool to start pulling the strip up.

Paso 4  ¶ 

The yellow circles and the spots on the other side of the screen from the circles represent  circular tabs holding the plastic screen cover in.

Paso 4  ¶ 

  • The yellow circles and the spots on the other side of the screen from the circles represent circular tabs holding the plastic screen cover in.

  • Use a flat tool such as the Ipod Opening tool to separate the screen from the tabs.

  • When removing the screen, the top part of the tabs holding the screen will break in order to allow for movement.

  • If tilting the panel to remove screen, be careful as the buttons may fall out. To avoid this, keep rubber cover over buttons during operations and keep angle of tilt at a minimum.