Saltar al contenido principal
Ayuda

Motorola V276 Flex Cable Replacement

Policía de Gramática

Policía de Gramática

Acepta a tu profesor de inglés interior y ayuda a mejorar la gramática de esta guía!

Installing a new flex cable for the Motorola V276 phone

Secciones
Herramientas
Herramientas (continuación)
Partes Pertinentes

Paso 1 Flex Cable  ¶ 

Remove the keypad from the bottom half of  the phone.

Paso 1 Flex Cable  ¶ 

  • Remove the keypad from the bottom half of the phone.

Paso 2  ¶ 

Detach bottom half of phone by pulling out on the bottom half and pulling up on the top half A small amount of force is necessary to pull the two pieces apart but be careful because the plastic may break

Paso 2  ¶ 

  • Detach bottom half of phone by pulling out on the bottom half and pulling up on the top half

  • A small amount of force is necessary to pull the two pieces apart but be careful because the plastic may break

Paso 3  ¶ 

Using the iPod remover tool, remove the front cover of the phone Using the iPod remover tool, remove the front cover of the phone

Paso 3  ¶ 

  • Using the iPod remover tool, remove the front cover of the phone

Paso 4  ¶ 

Remove the four screws holding in the metal cover. Remove the four screws holding in the metal cover.

Paso 4  ¶ 

  • Remove the four screws holding in the metal cover.

Paso 5  ¶ 

Using the spudger remove the plastic protector case around the camera

Paso 5  ¶ 

  • Using the spudger remove the plastic protector case around the camera

Paso 6  ¶ 

Using iPod remover tool peel off gold sticker that holds the flex cable in place

Paso 6  ¶ 

  • Using iPod remover tool peel off gold sticker that holds the flex cable in place

Paso 7  ¶ 

Slide flex cable through the tiny slit located in the hole on the side of the frame

Paso 7  ¶ 

  • Slide flex cable through the tiny slit located in the hole on the side of the frame

Paso 8  ¶ 

Slide Flex cable through the rectangular hole in the bottom half of the frame Slide Flex cable through the rectangular hole in the bottom half of the frame

Paso 8  ¶ 

  • Slide Flex cable through the rectangular hole in the bottom half of the frame

Paso 9  ¶ 

Remove the flex cable and the green logic board (still connected) from the frame of the phone

Paso 9  ¶ 

  • Remove the flex cable and the green logic board (still connected) from the frame of the phone

Paso 10  ¶ 

Using the Spudger detach the flex from the green logic board Using the Spudger detach the flex from the green logic board

Paso 10  ¶ 

  • Using the Spudger detach the flex from the green logic board