Saltar al contenido principal
Ayuda

Sony Cyber-shot DSC-W5 Speaker Replacement

Herramientas Incorrectas

Herramientas Incorrectas

Ayuda a mejorar esta guía mejor usando las herramientas correctas en imágenes y/o texto.

  • Autor: Thomas
  • Dificultad: Moderar

Steps on how to replace the speaker.

Secciones
Herramientas

Paso 1 Speaker  ¶ 

Remove the two screws holding down the steel back plate. Remove steel back plate.

Paso 1 Speaker  ¶ 

  • Remove the two screws holding down the steel back plate.

  • Remove steel back plate.

Paso 2  ¶ 

Now remove the plastic plate that covers the motherboard. Now remove the plastic plate that covers the motherboard.

Paso 2  ¶ 

  • Now remove the plastic plate that covers the motherboard.

Paso 3  ¶ 

Warning: Electric Shock From this point on, hold the camera by the chrome edges ONLY.  Capacitors store electric charge even if the batteries are removed. Remove the blue cable.

Paso 3  ¶ 

  • Warning: Electric Shock From this point on, hold the camera by the chrome edges ONLY. Capacitors store electric charge even if the batteries are removed.

  • Remove the blue cable.

Paso 4  ¶ 

Disconnect the flash cable (black and white wires) before completely removing the front case. Gently start to remove the case.

Paso 4  ¶ 

  • Disconnect the flash cable (black and white wires) before completely removing the front case.

  • Gently start to remove the case.

  • Once the cable is free, set aside the front case.

Paso 5  ¶ 

The speaker should now be clearly seen on the underside of the camera. Gently unplug the speaker from the motherboard.

Paso 5  ¶ 

  • The speaker should now be clearly seen on the underside of the camera.

  • Gently unplug the speaker from the motherboard.

  • Replace the speaker.