Saltar al contenido principal
Ayuda

Disassembling Power Mac G5 Side Panel

Sólo Prerrequisito

Sólo Prerrequisito

Por favor, ten en cuenta que esta guía es sólo un prerrequisito para otras guías.

These instructions will show you the very first step into accessing the inside of the Apple G5.

Paso 1 Side Panel  ¶ 

To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

Paso 1 Side Panel  ¶ 

  • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

  • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

Paso 2  ¶ 

Remove all the cables, including the power cables before opening the unit.

Paso 2  ¶ 

  • Remove all the cables, including the power cables before opening the unit.

Paso 3  ¶ 

Lift the tab to unlock the side panel. The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

Paso 3  ¶ 

  • Lift the tab to unlock the side panel.

  • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

Paso 4  ¶ 

Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle.

Paso 4  ¶ 

  • Remove the air deflector (the clear plastic cover) by pulling on the handle.