Saltar al contenido principal
Ayuda

iBook G4 14" 933 MHz-1.33 GHz I/O Bezel Replacement

  • Autor: iRobot
  • Dificultad: Difícil

Replacing the plastic covering surrounding the input and output ports.

Paso 1 I/O Bezel  ¶ 

Remove the two Phillips screws securing the white plastic fingers of the I/O bezel to the metal framework.

Paso 1 I/O Bezel  ¶ 

  • Remove the two Phillips screws securing the white plastic fingers of the I/O bezel to the metal framework.

  • The longer screw goes into the longer finger, closer to the display.

Paso 2  ¶ 

Lift up the left side of the computer and slide the I/O bezel away.

Paso 2  ¶ 

  • Lift up the left side of the computer and slide the I/O bezel away.