Saltar al contenido principal
Ayuda

iMac Intel 21.5" EMC 2308 Right Speaker Replacement

Potencialmente Peligroso

Potencialmente Peligroso

Una lesión puede resultar si este procedimiento no se sigue correctamente. Ten precaución y sigue todas las advertencias.

Unable to bring the noise? Replace your right speaker and restore the noise back to your iMac.

Paso 1 Right Speaker  ¶ 

The right speaker cable connector may be entangled with various other connectors.

Paso 1 Right Speaker  ¶ 

  • The right speaker cable connector may be entangled with various other connectors.

  • Carefully de-route the right speaker cable connector through the channel in the outer case.

Paso 2  ¶ 

Remove two T10 Torx screws securing the audio ports to the outer case. Lift the audio ports out of the outer case.

Paso 2  ¶ 

  • Remove two T10 Torx screws securing the audio ports to the outer case.

  • Lift the audio ports out of the outer case.

  • A pair of tweezers is helpful to put the ports back in place. First insert the lower tab into the bracket on the outer case, then fasten the screw to secure the jack to the outer case.

Paso 3  ¶ 

Remove the single 13 mm T10 Torx screw securing the right speaker assembly to the outer case.

Paso 3  ¶ 

  • Remove the single 13 mm T10 Torx screw securing the right speaker assembly to the outer case.

Paso 4  ¶ 

Gently lift the right speaker assembly out of the outer case.

Paso 4  ¶ 

  • Gently lift the right speaker assembly out of the outer case.