Saltar al contenido principal
Ayuda

iBook G4 12" 800 MHz-1.2 GHz DC-In Board Replacement

  • Autor: iRobot
  • Dificultad: Moderar

Tripped over your power cord? At least you don't have to replace the entire logic board.

Secciones
Archivos
Herramientas

Paso 1 DC-In Board  ¶ 

Remove the two Phillips screws securing the DC-In board.

Paso 1 DC-In Board  ¶ 

  • Remove the two Phillips screws securing the DC-In board.

Paso 2  ¶ 

Disconnect the DC-In cable from the logic board.

Paso 2  ¶ 

  • Disconnect the DC-In cable from the logic board.

Paso 3  ¶ 

Deroute the cable from around the optical drive, removing tape as necessary, and angle the DC-In board out of its compartment.

Paso 3  ¶ 

  • Deroute the cable from around the optical drive, removing tape as necessary, and angle the DC-In board out of its compartment.