Saltar al contenido principal
Ayuda

PSP 300x LCD Screen Replacement

Imágenes Inconsistentes

Imágenes Inconsistentes

Actualizando las imágenes de esta guía para que sean más consistente con los requisitos previos aumentaran su genialidad.

Guía Destacada

Guía Destacada

Esta guía ha sido valorada como excepcionalmente genial por el personal de iFixit.

  • Autor: mbnewsom
  • Tiempo estimado: 10 minutos
  • Dificultad: Fácil

Guide for replacing the LCD Screen in a Sony PSP-3000

Secciones
Herramientas

Paso 1 LCD Screen  ¶ 

Push the homebar to the right to release the tab located on the right side of the LCD screen.

Paso 1 LCD Screen  ¶ 

  • Push the homebar to the right to release the tab located on the right side of the LCD screen.

  • DO NOT completely remove the homebar, as it is still connected by ribbon cables.

Paso 2  ¶ 

Slowly lift the LCD screen off the PSP starting at the top edge corner. Again, the LCD screen is attached by ribbon cables, so do not remove it completely.

Paso 2  ¶ 

  • Slowly lift the LCD screen off the PSP starting at the top edge corner.

  • Again, the LCD screen is attached by ribbon cables, so do not remove it completely.

  • Orientation of PSP is flipped in photo.

Paso 3  ¶ 

Flip the small brown locks on the four ribbon cable connectors up using a spudger or fingernail. Pull all four ribbon cables out.

Paso 3  ¶ 

  • Flip the small brown locks on the four ribbon cable connectors up using a spudger or fingernail.

  • Pull all four ribbon cables out.

  • Now remove the LCD screen and homebar from the PSP.

Paso 4  ¶ 

Remove the metal tab that lies above the LCD screen.

Paso 4  ¶ 

  • Remove the metal tab that lies above the LCD screen.

  • Upon reassembly, make note that the stamped lettering faces down, and the large tab fits just above the motherboard to the right hand side of the left trigger.