Saltar al contenido principal
Ayuda

Sega Dreamcast Expansion Bay Replacement

  • Autor: wkwong
  • Tiempo estimado: 30 segundos
  • Dificultad: Muy fácil

A guide to remove the expansion bay from the Sega Dreamcast.

Paso 1 Expansion Bay  ¶ 

Verify that the console is disconnected from the AC outlet before you begin. Flip the console over on its back.

Paso 1 Expansion Bay  ¶ 

  • Verify that the console is disconnected from the AC outlet before you begin.

  • Flip the console over on its back.

  • Take note of your model number, in case replacement parts are needed.

Paso 2  ¶ 

Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console. Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console. Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.

Paso 2  ¶ 

  • Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.