Saltar al contenido principal
Ayuda

iPhone 5 Vibrator Replacement

Sólo Prerrequisito

Sólo Prerrequisito

Por favor, ten en cuenta que esta guía es sólo un prerrequisito para otras guías.

prereq for removing vibrator—after logic board, before front clips and rear case.

Paso 1 Vibrator  ¶ 

Remove the following screws securing the vibrator bracket and motor to the rear case: One 2.3 mm Phillips screw

Paso 1 Vibrator  ¶ 

  • Remove the following screws securing the vibrator bracket and motor to the rear case:

  • One 2.3 mm Phillips screw

  • One 1.7 mm Phillips screw

  • One 1.6 mm Phillips screw in the top of the rear case

Paso 2  ¶ 

Remove the vibrator bracket and motor from the rear case.

Paso 2  ¶ 

  • Remove the vibrator bracket and motor from the rear case.