Saltar al contenido principal
Ayuda

NeXTstation Teardown

Teardown

Teardown

Teardowns proveen una mirada adentro de un device y no se deben utilizar como instrucciones de desmontaje.

NeXT Computer was founded in October of 1985 when Steve Jobs was forced out of Apple by John Scully. He started NeXT as a high-end computer company targeted at the University/Scientist/Computing Industry. NeXT only ever released , the NeXTStation, and The NeXTCube, in different variations. NeXT computers were high-end workstation computers, and only a few thousand were ever sold. The NeXTStation featured a, though the Turbo NeXTStation featured a68040. There were color and non-color variations of the NeXTStation. The world's first web server was created by Tim Berners-Lee, at CERN on a NeXTCube. NeXT computers were used to make games like Doom, and Wolfenstein. This is my&W NeXTStation. Mac OS X Is based off of NeXTStep, the NeXT OS.

Paso 1 NeXTstation Teardown  ¶ 

The NeXTStation, this is a great addition to any computer collection. The NeXTStation, this is a great addition to any computer collection. The NeXTStation, this is a great addition to any computer collection.

Paso 1 NeXTstation Teardown  ¶ 

  • The NeXTStation, this is a great addition to any computer collection.

Paso 2  ¶ 

Turn the NeXTStation around, and remove this screw: Then, lift the top cover of the computer. This will reveal the guts. The ports from left to right: SCSI2, Keyboard & Mouse, DSP Port, DB-19(MegaPixel Display), DB-9(Serial), RJ-45(Ethernet), Coaxial (10b2 Ethernet), Power

Paso 2  ¶ 

  • Turn the NeXTStation around, and remove this screw:

  • Then, lift the top cover of the computer. This will reveal the guts.

  • The ports from left to right: SCSI2, Keyboard & Mouse, DSP Port, DB-19(MegaPixel Display), DB-9(Serial), RJ-45(Ethernet), Coaxial (10b2 Ethernet), Power

  • I find notes in everything!

Paso 3  ¶ 

Removing the hard drive: The NeXTStation uses a 50-Pin SCSI Hard Drive up to 4GB.

Paso 3  ¶ 

  • Removing the hard drive:

  • The NeXTStation uses a 50-Pin SCSI Hard Drive up to 4GB.

  • Remove all of the cables from the logic board.

Paso 4  ¶ 

Then remove this screw. Once the screw is removed, pivot the drive up on a 45 Degree angle, then slide it out. Once the screw is removed, pivot the drive up on a 45 Degree angle, then slide it out.

Paso 4  ¶ 

  • Then remove this screw.

  • Once the screw is removed, pivot the drive up on a 45 Degree angle, then slide it out.

Paso 5  ¶ 

The Hard Drive & Caddy

Paso 5  ¶ 

  • The Hard Drive & Caddy

Paso 6  ¶ 

Removing the floppy disk drive: The NeXTStation uses a non-standard 2.88MB 3.5" floppy drive, though it uses the standard floppy connector. Remove the floppy cable.

Paso 6  ¶ 

  • Removing the floppy disk drive:

  • The NeXTStation uses a non-standard 2.88MB 3.5" floppy drive, though it uses the standard floppy connector.

  • Remove the floppy cable.

  • Then, remove this screw.

Paso 7  ¶ 

Then, just like the hard drive, pivot the drive up 45 degrees, and pull it out. Then, just like the hard drive, pivot the drive up 45 degrees, and pull it out. Then, just like the hard drive, pivot the drive up 45 degrees, and pull it out.

Paso 7  ¶ 

  • Then, just like the hard drive, pivot the drive up 45 degrees, and pull it out.

Paso 8  ¶ 

Removing the fan: Remove this connector. Remove these screws.

Paso 8  ¶ 

  • Removing the fan:

  • Remove this connector.

  • Remove these screws.

  • Remove the fan.

Paso 9  ¶ 

Removing the logic board: Remove the power supply connector.  Just lift it straight up, and it should come free. Remove this screw.

Paso 9  ¶ 

  • Removing the logic board:

  • Remove the power supply connector. Just lift it straight up, and it should come free.

  • Remove this screw.

Paso 10  ¶ 

Lift the end of the logic board(away from the ports), and slide it away from the ports. Now, set the board aside. Now, set the board aside.

Paso 10  ¶ 

  • Lift the end of the logic board(away from the ports), and slide it away from the ports.

  • Now, set the board aside.

Paso 11  ¶ 

Power Supply: Remove this screw. Lift the power supply up, and out.

Paso 11  ¶ 

  • Power Supply:

  • Remove this screw.

  • Lift the power supply up, and out.

Paso 12  ¶ 

The Logic Board Overview:

Paso 12  ¶ 

  • The Logic Board Overview:

  • The Board has a 25Mhz Motorola 68040 CPU, This board features a ton of chips for something made nearly 20 years ago.

  • The CPU: Motorola XC68040RC25

  • The Co-Procesor: MB610313

  • Motorola Chips

  • Intel Chips

  • AMD Chips (Intel and AMD In the same computer?)

  • Fujitsu Chips

Paso 13  ¶ 

Made in the USA, you don't see this anymore. The Serial # Looks like my NeXTStation came from WilTel.

Paso 13  ¶ 

  • Made in the USA, you don't see this anymore.

  • The Serial #

  • Looks like my NeXTStation came from WilTel.

  • It is model # N1100