Saltar al contenido principal
Ayuda

Lasko 4910 Filter Replacement

The filter is dirty and needs to be replaced in your Lasko 4910.

  • Autor: Julie Ling
  • Tiempo estimado: 10 minutos
  • Dificultad: Fácil

If the filter in the fan is dirty and needs to be replaced, use this guide to learn how to dissemble the top part of the fan and replace your filter.

Paso 1 Filter  ¶ 

On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver

Paso 1 Filter  ¶ 

  • On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver

Paso 2  ¶ 

Remove the top plastic portion of the fan

Paso 2  ¶ 

  • Remove the top plastic portion of the fan

Paso 3  ¶ 

Remove all four 4mm screws using the Phillips #1 screwdriver.

Paso 3  ¶ 

  • Remove all four 4mm screws using the Phillips #1 screwdriver.

Paso 4  ¶ 

Remove the filter from the fan.

Paso 4  ¶ 

  • Remove the filter from the fan.