Saltar al contenido principal
Ayuda

Lenovo Ideapad 320-15ABR Hard Drive Replacement

Guía de Estudiante Destacada

Guía de Estudiante Destacada

Esta guía fue realizada gracias al duro trabajo de nuestros fantásticos estudiantes y ha sido valorada como excepcionalmente genial por el personal de iFixit.

This guide will walk you through the process of replacing your hard drive in a step-by-step manner.

  • Autor: Anurag Deb
  • Tiempo estimado: 10 - 15 minutos
  • Dificultad: Moderar

This guide will show you how to remove and replace the hard drive for the device.

Before you start replacing the hard drive, make sure to turn the device off, remove the battery and disconnect the laptop from any power source.

Paso 1 Hard Drive  ¶ 

Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode. Gently lift up the hard disk from the left.

Paso 1 Hard Drive  ¶ 

  • Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode.

  • Gently lift up the hard disk from the left.

Paso 2  ¶ 

Do not lift hard drive straight up as it risks  breaking the connection port. Carefully pull the hard drive away and out of the connection port. Carefully pull the hard drive away and out of the connection port.

Paso 2  ¶ 

  • Do not lift hard drive straight up as it risks breaking the connection port.

  • Carefully pull the hard drive away and out of the connection port.

Paso 3  ¶ 

Detach the bracket from the hard drive by pulling the bracket edges apart. Detach the bracket from the hard drive by pulling the bracket edges apart. Detach the bracket from the hard drive by pulling the bracket edges apart.

Paso 3  ¶ 

  • Detach the bracket from the hard drive by pulling the bracket edges apart.