Saltar al contenido principal
Ayuda

Acer Aspire V3-551-8469 USB Port Replacement

Use this guide to replace an Acer Aspire V3-551-8469 USB port.

  • Autor: Maritsa Garcia
  • Tiempo estimado: 10 minutos
  • Dificultad: Moderar

If your laptop isn't downloading data into a plugged in USB device, the USB port will need to be replaced. Use this guide to replace broken USB ports in your Acer Aspire V3-551-8469 laptop. No complicated manipulation is required.

Paso 1 USB Port  ¶ 

To release the battery, slide the orange tab to the right with a spudger. The battery is now released and can be picked up and set to the side.

Paso 1 USB Port  ¶ 

  • To release the battery, slide the orange tab to the right with a spudger.

  • The battery is now released and can be picked up and set to the side.

Paso 2  ¶ 

Remove the sixteen 5.3 mm Phillips #0 screws. Remove the three  3 mm Phillips #00 screws.

Paso 2  ¶ 

  • Remove the sixteen 5.3 mm Phillips #0 screws.

  • Remove the three 3 mm Phillips #00 screws.

Paso 3  ¶ 

Flip the computer over and remove the touchpad cover. Flip the computer over and remove the touchpad cover.

Paso 3  ¶ 

  • Flip the computer over and remove the touchpad cover.

Paso 4  ¶ 

Remove the ribbon cable connecting the USB ports to the computer.

Paso 4  ¶ 

  • Remove the ribbon cable connecting the USB ports to the computer.

Paso 5  ¶ 

Using a Phillips #0 screwdriver, remove the one screw.

Paso 5  ¶ 

  • Using a Phillips #0 screwdriver, remove the one screw.

Paso 6  ¶ 

Slide the USB port out.

Paso 6  ¶ 

  • Slide the USB port out.