Hover-1 Coast Wheel Replacement
This guide will show step by step how to remove and replace the wheel on the Coast
- Autor: Jace Oppenlander
- Tiempo estimado: 10 minutos
- Dificultad: Fácil
If you are ever in the situation where any of your Coast wheels are needed to be replaced don't hesitate replacing them. This does not require any difficult steps but it is important for your safety along with others around you.
Incrustar esta guía
Elige un tamaño y copea el siguiente código para incrustar esta guía como un pequeño widget en tu sitio / foro.
Paso 1 — Wheel ¶
Identify the wheel you are wanting to replace.
Paso 2 ¶
Find the Socket wrench located in the Hover-1 Coast packaging.
Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.
Paso 3 ¶
Remove the nut off the axle.
Remove the washer off the axle.
Paso 4 ¶
To avoid losing any parts, place them on a flat surface.
Slide the unwanted wheel off the axle.
Slide the new wheel on the axle.