Saltar al contenido principal
Ayuda

Samsung NP-R540-JA09US Front Panel Replacement

Access the inside of the laptop by removing the front panel of your Samsung NP-R540-JA09US.

  • Autor: Daylyn Bourland
  • Tiempo estimado: 2 - 3 minutos
  • Dificultad: Moderar

Use this guide to remove the front panel of your laptop to access the inner components of your device.

Secciones

Paso 1 Front Panel  ¶ 

Remove the two screws with a Phillips #00 screwdriver.

Paso 1 Front Panel  ¶ 

  • Remove the two screws with a Phillips #00 screwdriver.

Paso 2  ¶ 

Remove the highlighted screws with a Phillips #0 Screwdriver.

Paso 2  ¶ 

  • Remove the highlighted screws with a Phillips #0 Screwdriver.

Paso 3  ¶ 

Pry the front panel away from the base with an Opening Tool. Pry the front panel away from the base with an Opening Tool. Pry the front panel away from the base with an Opening Tool.

Paso 3  ¶ 

  • Pry the front panel away from the base with an Opening Tool.

Paso 4  ¶ 

Disconnect the speaker wire from the motherboard. Disconnect the speaker wire from the motherboard.

Paso 4  ¶ 

  • Disconnect the speaker wire from the motherboard.