Installing a Petsafe Removable Dog Panel
Installing the removable Petsafe Dog Panel into your sliding glass door.
- Autor: Joshua Novello
- Tiempo estimado: 40 minutos
- Dificultad: Moderar
The Petsafe Dog Panel is a removable dog door that can be installed into the frame of your sliding glass door. Before continuing to the guide, make sure the Petsafe Dog Panel contains all the provided materials and that it is not damaged in any way. Please make sure to pay attention to the warnings before screwing into the panel or your door frame through out the installation process.
Incrustar esta guía
Elige un tamaño y copea el siguiente código para incrustar esta guía como un pequeño widget en tu sitio / foro.
Paso 1 — Petsafe Dog Panel ¶
Make sure you have all the tools necessary.
Paso 2 ¶
Receive your PetSafe dog door in the mail.
Paso 3 ¶
Measure the height of the sliding glass door frame.
Paso 4 ¶
Remove your lock latch from the sliding door frame.
Paso 5 ¶
Slide the top of your dog panel into the of the sliding glass door.
Place the bottom portion of the dog panel into the of the sliding glass door.
Paso 6 ¶
Measure 12” from the top, down the side of your sliding glass door frame and mark it.
Mark 1” above the pet flap onto the edge of your sliding glass door.
Paso 7 ¶
With a , drill clearance holes into the marks made on the sliding glass door frame
Paso 8 ¶
Fasten the panel to the interior side of the sliding glass frame with the provided .
Paso 9 ¶
Tighten the screws with a screwdriver.
Paso 10 ¶
Repeat steps 8 and 9 to secure the dog panel into place. Follow these steps when drilling into the clearance hole marked at the top of the frame.
Paso 11 ¶
Slide your sliding door flush against the dog door.