Saltar al contenido principal
Ayuda

Lenovo Ideapad Flex 4-1570 Cooling Fan Replacement

Replacing the cooling fan to reduce the loud, irregular sound.

  • Autor: Isaiah Vang
  • Tiempo estimado: 5 - 10 minutos
  • Dificultad: Moderar

If the laptop is loud, sounds irregular, and the bottom is hot, use this guide to replace your cooling fan.

Secciones
Herramientas

Paso 1 Cooling Fan  ¶ 

Remove the three 5mm screws using the T5 Torx Screwdriver. Remove the three 5mm screws using the T5 Torx Screwdriver.

Paso 1 Cooling Fan  ¶ 

  • Remove the three 5mm screws using the T5 Torx Screwdriver.

Paso 2  ¶ 

Pull black wire and gray wire away from cooling fan clips using the tweezers. Pull black wire and gray wire away from cooling fan clips using the tweezers.

Paso 2  ¶ 

  • Pull black wire and gray wire away from cooling fan clips using the tweezers.

Paso 3  ¶ 

Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.

Paso 3  ¶ 

  • Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.