Saltar al contenido principal
Ayuda

Cuisinart CPB-380 Motor Replacement

Percance de Marcado

Percance de Marcado

Esta guía necesita mejores marcas. Ayuda corrigiendo o haciendo algunas anotaciones de marcado.

Mejor introducción

Mejor introducción

Mejora esta guía completando o revisando su introducción.

This guide will walk users through the process of replacing the motor in the Cuisinart CPB-380.

  • Autor: William Hesse
  • Tiempo estimado: 40 - 50 minutos
  • Dificultad: Difícil

Paso 1 Motor  ¶ 

Remove the four 13mm screws holding down the frame located at the bottom of the inverted blender using the Phillips #2 screwdriver. Remove frame.

Paso 1 Motor  ¶ 

  • Remove the four 13mm screws holding down the frame located at the bottom of the inverted blender using the Phillips #2 screwdriver.

  • Remove frame.

Paso 2  ¶ 

Grab the motor by the black gear and the white filter and unscrew the black gear. Grab the motor by the black gear and the white filter and unscrew the black gear.

Paso 2  ¶ 

  • Grab the motor by the black gear and the white filter and unscrew the black gear.

Paso 3  ¶ 

With the metal spudger remove the four rubber stoppers. Remove the four 13mm screws with the Phillips #2 screwdriver. Remove the four 13mm screws with the Phillips #2 screwdriver.

Paso 3  ¶ 

  • With the metal spudger remove the four rubber stoppers.

  • Remove the four 13mm screws with the Phillips #2 screwdriver.

Paso 4  ¶ 

Separate the top from the motor.

Paso 4  ¶ 

  • Separate the top from the motor.

  • Pinch perpendicular to the flat surface and pull out the blue wire.