Saltar al contenido principal
Ayuda

DJI Phantom 4 Advanced Ultrasonic Sensor Replacement

How to replace the DJI Phantom 4 Advanced ultrasonic sensors.

  • Autor: David Hudson
  • Tiempo estimado: 45 minutos - 2 horas
  • Dificultad: Moderar

The ultrasonic sensors use sound waves to help position the drone in three-dimensional space. If your DJI drone experiences either erratic flight behavior or the inability to hold its position when staying still in the air your ultrasonic sensors may need to be replaced.

Secciones
Herramientas

Paso 1 Ultrasonic Sensor  ¶ 

Remove the three 2.8 mm screws with a JIS #000 screwdriver. The screw on the back of the ultrasonic sensor is covered by foam.

Paso 1 Ultrasonic Sensor  ¶ 

  • Remove the three 2.8 mm screws with a JIS #000 screwdriver.

  • The screw on the back of the ultrasonic sensor is covered by foam.

Paso 2  ¶ 

Pry the ribbon cable off the ultrasonic sensor using a plastic opening tool. Pry the ribbon cable off the ultrasonic sensor using a plastic opening tool.

Paso 2  ¶ 

  • Pry the ribbon cable off the ultrasonic sensor using a plastic opening tool.